QualityCentral Delphi for PHP entries

No connection Informix Databases

Alexander Mittel — Mon, 25 Feb 2008 01:33:52 GMT

QC#: 55217 Version: 1.0 Status: Awaiting Requested Information Resolution: Need more information/demo/steps Description: No connect to a Informix database. Neigther with driver "informix" nor "informix72".
Error is PHP error :
'Fatal e

Configurable php.ini extensions to be loaded

Jordi Tudela — Mon, 25 Feb 2008 01:32:50 GMT

QC#: 44760 Version: 1.0 Status: Awaiting Requested Information Resolution: Need more information/demo/steps Description: If you would like to use the php_xmlrpc.dll, you will edit your php.ini and uncomment the appropiate line.
Delphi for php rewrites al

Can't connect oracle as I can't cusotmize PHP.ini

Laurent NAVARRO — Mon, 18 Feb 2008 20:01:33 GMT

QC#: 44137 Version: 1.0 Status: Open defect, requires resolution Resolution: Need more information/demo/steps Description: It's not possible to connect to oracle database on internal web server as the php.ini is overwritten at each delphi run and this php

How about some simple examples

James Gold — Mon, 18 Feb 2008 20:01:33 GMT

QC#: 44189 Version: 1.0 Status: Open defect, requires resolution Description: Background: My experience with PHP is very limited, although I have been using C++Builder since it came out and Delphi before that since it came out, so I am not new to program

How about some simple examples

James Gold — Mon, 18 Feb 2008 20:01:33 GMT

QC#: 44190 Version: 1.0 Status: Open defect, requires resolution Resolution: Bug is a duplicate (must note dup bug #) Description: Sorry to cross-post, but there's not much in this area, and I think this is important. Anyone moderating this can dump one

Would like to be able to create new project & project group when none exists

Brian Layman — Mon, 18 Feb 2008 20:00:49 GMT

QC#: 43562 Version: 1.0 Status: Open defect, requires resolution Description: Use case:: Would like to open one or more php files from explorer and turn them into a project and project group.

AutoCompletion Exception

Michael Urban — Mon, 18 Feb 2008 20:00:23 GMT

QC#: 43556 Version: 1.0 Status: Open defect, requires resolution Description: AutoCompletion frequently shows an exception when on the second level of objects when objects in included files are referenced.

Font issues with D4PHP code editing

Myles Wakeham — Mon, 18 Feb 2008 19:59:30 GMT

QC#: 43534 Version: 1.0 Status: Open defect, requires resolution Description: If I choose Properties on the code editing area of D4PHP (where I enter my PHP code), and change the display properties to use a font other than Courier (ie. Lucinda Console), r

When you use the IDE on a monitor to the left of your main monitor, all controls are set to their maximum size

Brian Layman — Mon, 18 Feb 2008 19:59:14 GMT

QC#: 43470 Version: 1.0 Status: Open defect, requires resolution Description: I have a three monitor system, but that is not required. On a monitor to the left you your main screen, drop an edit control. It will resize to around 800x600

Error in vcl.inc.php file

David Christensen — Thu, 24 Jan 2008 22:50:00 GMT

QC#: 53982 Version: 1.0 Status: Closed defect, no action required Resolution: Behavior is as designed Description: I get this error when I try to run a simple form.
Warning: require_once(../../../../../../../c:/program files/codegear/delphi for php/1.

Receive component can't load upon execution

David Christensen — Thu, 24 Jan 2008 22:48:59 GMT

QC#: 53979 Version: 1.0 Status: Closed defect, no action required Resolution: Behavior is as designed Description: Cannot load package 'samplePropertyEditor.' It contains unit 'uSamplePropertyEditor,'which is also contained in package 'nativePropertyEdit

MySQL not installed when Delphi for PHP installed

Richard Matzinger — Thu, 24 Jan 2008 22:47:00 GMT

QC#: 53753 Version: 1.0 Status: Closed defect, no action required Resolution: Behavior is as designed Description: MySQL not installed when Delphi for PHP installed. I was told that Delphi for PHP includes Apache, PHP, AND MySQL. I installed the trial

Components on a window can't do an AJAX call

Marc Geldon — Thu, 24 Jan 2008 22:45:34 GMT

QC#: 53728 Version: 1.0 Status: Open defect, requires resolution Description: Components (for a example a button) placed on a window component can't do an AJAX call. This ends in an javascript error: "hiddenfield has no properties".
Try it for yourself i

PageControl tabs overlap each other

Yann Castel — Thu, 24 Jan 2008 22:42:50 GMT

QC#: 53200 Version: 1.0 Status: Open defect, requires resolution Resolution: Bug could not be reproduced as submitted Description: The pages of a PageControl component overlap each other, so that the components on the inactive tabs are shown on the activ

Visible option of Columns in DBGrid

Natane Nat — Thu, 24 Jan 2008 22:40:12 GMT

QC#: 53121 Version: 1.0 Status: Open defect, requires resolution Description: Visible option of Columns in DBGrid is not working.

MSSQL not work.

José Ricardo Aviles — Thu, 24 Jan 2008 22:38:03 GMT

QC#: 52819 Version: 1.0 Status: Open defect, requires resolution Description: Hi. I m using the mssql driver for MSSQL 2000 but the comands don t work correctly:
function BTN_ULTClick($sender, $params)
{
$this->Query1->Last();
}
function BTN_PROXClick($

Possible Memory Leak

Opus International Consultants I T Consultant — Thu, 24 Jan 2008 22:37:23 GMT

QC#: 52526 Version: 1.0 Status: Open defect, requires resolution Description: When I run IDE the memory usage keeps creeping up and up until the following.
Access violation at address 008DD468 in module 'delphiforphp.exe'. Read of address 00000008.
Exce

Components on pagecontrol do not update

Marc Geldon — Thu, 24 Jan 2008 18:42:38 GMT

QC#: 53729 Version: 1.0 Status: Open defect, requires resolution Description: Components on a pagecontrol do not update after an AJAX call, only with a workaround

StoreProcedure MYSQL no funciona

CARLOS SEGUEL IMHOLZ — Thu, 24 Jan 2008 18:40:41 GMT

QC#: 54448 Version: 1.0 Status: Open defect, requires resolution Description: El componente storeprocedure produce un error al llamar al procedimiento en un motor MYSQL
El procedimiento si funciona al llamarlo de php con la instruccion CALL, o al ejecutar

Saved desktop not reloaded

János Schmidt — Thu, 24 Jan 2008 18:34:23 GMT

QC#: 54928 Version: 1.0 Status: Open defect, requires resolution Description: The last saved project and desktop is not reloaded after restart.

ODBC Access causes many PHP notices Undefined property: Query::$Active to error_log

Mika Koistinen — Thu, 24 Jan 2008 18:30:33 GMT

QC#: 55102 Version: 1.0 Status: Open defect, requires resolution Description: I have simple project with database, query and datasource. Database drivername is ODBC. When application is run on server I receive many entries to error log.
[error] [client

ERROR USING DATA MODULE DELPHI4PHP

paulo perdigao — Thu, 24 Jan 2008 18:30:06 GMT

QC#: 55374 Version: 1.0 Status: Open defect, requires resolution Description: I DID ALL UPDATES IN THE NEW UPDATED VERSION OF DELPHI4PHP. AND I HAVE PROBLEMS COMPILING THE NATIVE EXEMPLO ON THE NEW VERSION; IT USES TO WORK BEFORE THE UPDATE. NOW I HAVING

SVN rev 178 or later causes EPropertyNotFound error

Charles Steel — Thu, 24 Jan 2008 18:29:04 GMT

QC#: 55451 Version: 1.0 Status: Open defect, requires resolution Description: With SVN revision < 178, the simplemanagement.php example works fine.
Starting at 178 you can view a record, but on clicking the save button the
follwing error occurs:
Applica

With the "Edit Field" is no good work. I haven't a input cursor, i haven't a Tabulator and I can't Selected any text. Where is the Problem? I have the same Problem but only in FireFox 2.0!

Klaus-Dieter Bluszis — Thu, 24 Jan 2008 18:23:59 GMT

QC#: 56522 Version: 1.0 Status: Open defect, requires resolution Description: With the "Edit Field" is no good work. I haven't a input cursor, i haven't a Tabulator and I can't Selected any text. Where is the Problem? I have the same Problem but only in

What about the Ecommerce demo for Interbase?

Pablo Fabian Romero — Thu, 24 Jan 2008 18:22:10 GMT

QC#: 56883 Version: 1.0 Status: Open defect, requires resolution Description: As you may know, we need to explore the demos because of the poor documentation in Delphi for PHP.
I made more stable the update 2 following the same procedure explained here

Crash win xp 64

Martti Pitkanen — Thu, 24 Jan 2008 18:14:09 GMT

QC#: 57342 Version: 1.0 Status: Open defect, requires resolution Description: My project reports when Desing is initiated:
"application error"
The followin tags were not closed: object
Line: 0
FYI: there is XP 64 Bit also
this D4PHP beta is versoin 2, is

Crash on large xml form file

Girolamo Santoro — Wed, 09 Jan 2008 17:17:39 GMT

QC#: 56770 Version: 1.0 Status: New defect, requires tester review Description: When I try to open this large file attached (the xml form is 761Kb) in design mode, D4PHP freezes for a while and then it throws an error message:
Cannot create file "C:\Docu

UTF-8 garbled by ajaxcall

Natane Nat — Tue, 08 Jan 2008 02:06:47 GMT

QC#: 52476 Version: 1.0 Status: Open defect, requires resolution Description: If ajaxcall is used, the characters become garbled.

Delphi for PHP jumps always back to primary monitor if multiple monitor on left side

Knud van Eeden — Fri, 04 Jan 2008 02:15:13 GMT

QC#: 50915 Version: 1.0 Status: New defect, requires tester review Description: Delphi for PHP does not work correct on multiple monitor on the LEFT

===

Cause:

-Because the monitor is on defined on the left, its X coordinate is
NEGATIVE (e.g. -1

how to register MSSQL database in Delphi for PHP

Amanda Tahhan — Fri, 07 Dec 2007 14:39:05 GMT

QC#: 44982 Version: 1.0 Status: New defect, requires tester review Description: hello, I'm trying to build a Database Application using Delphi for PHP, i found it great product but it only allows me to register an Interbase or MySQL databases, and i need

Parameter wrong TYPE in dbtables.inc.php

Erich Rieder — Fri, 07 Dec 2007 14:30:39 GMT

QC#: 45742 Version: 1.0 Status: New defect, requires tester review Description: Warning: unserialize() expects parameter 1 to be string, array given in /opt/lampp/htdocs/PLA00/vcl/dbtables.inc.php on line 1104

No data shows up in dbgrid at production environment

Roberto Villa — Fri, 07 Dec 2007 14:14:29 GMT

QC#: 46532 Version: 1.0 Status: New defect, requires tester review Description: When moving the project to production environment nothing shows up on dbgrid.
Server: SuseLinux
WebServer: Apache with php support.
DB Server: MySQL
The vcl has been uploade

combobox database connection problem

x x — Fri, 07 Dec 2007 13:47:22 GMT

QC#: 46592 Version: 1.0 Status: Awaiting Requested Information Resolution: Need more information/demo/steps Description: i setup the datasource and datafield of combobox and run the project and i got nothing.
i setup textfield in the same configuration an

label->link nonascii (latin2) not displayed under PHP5.2.1

Registered User — Mon, 05 Nov 2007 05:42:41 GMT

QC#: 50636 Version: 1.0 Status: Open defect, requires resolution Resolution: Bug is a duplicate (must note dup bug #) Description: When a link of label contains a nonascii character (eg. " " or " "), the label (link) doesn't appear under PHP 5.2.1 or 5.2.

label->caption (latin2) and link together problem

Registered User — Mon, 05 Nov 2007 05:35:06 GMT

QC#: 51415 Version: 1.0 Status: Open defect, requires resolution Description: If a label's caption contains latin2 (windows-1250) characters and label's link is filled, the label disappeared.
(The PHP 5.1.x is correct, but PHP 5.2.x is not.)

Add PDO support

Paul Gregg — Wed, 17 Oct 2007 23:32:20 GMT

QC#: 45443 Version: 1.0 Status: Open defect, requires resolution Description: If you added generic PDO support then you could by default enable all major database access including mysql/interbase and add SQL Server, Oracle, Sqlite, etc.
Additional benefi

Can't get RecordCount in MySQLQuery

Natane Nat — Wed, 17 Oct 2007 23:30:14 GMT

QC#: 51672 Version: 1.0 Status: Resolved defect, requires verification Resolution: Bug has been fixed Description: Can't get RecordCount in MySQLQuery. It just returns -1.

MainMenu not visible

Klaus Kramer — Wed, 17 Oct 2007 23:25:59 GMT

QC#: 49596 Version: 1.0 Status: Open defect, requires resolution Resolution: Bug could not be reproduced as submitted Description: The sample you provide coming with Delphi for PHP is running. I also can add (drop) an additional MainMenu to the Form and i

When opening delphi for php update2

João Manoel de Santana Castro — Wed, 17 Oct 2007 23:16:35 GMT

QC#: 51442 Version: 1.0 Status: Closed defect, no action required Resolution: Behavior is as designed Description: Cannot load package 'samplePropertyEditor.' It contains unit 'uSamplePropertyEditor,'which is also contained in package 'nativePropertyEdit

Change MySQL/DBGrid Column-Titles

Registered User — Wed, 17 Oct 2007 23:15:05 GMT

QC#: 44850 Version: 1.0 Status: Closed defect, no action required Description: I like to change the titles in my DBGrid. The table is a MySQL-Table and I have created a dictionary TABLEDIC. I change the values in the TABLEDIC-Table under MySQL (phpMyAdmin

Pass component name to property editors

Jonathan Benedicto — Wed, 17 Oct 2007 23:12:49 GMT

QC#: 44114 Version: 1.0 Status: Open defect, requires resolution Description: Please add the ability to get the component's name in custom property editors.
For example, an instance of MyComponent, MyComponent1 is dropped on a page. The user opens the pr

LabeledEdit , DBedit causes error in IDE

Thomas Weber — Wed, 17 Oct 2007 23:09:58 GMT

QC#: 49362 Version: 1.0 Status: Open defect, requires resolution Resolution: Bug could not be reproduced as submitted Description: Adding a component like LabeldEdit or DBGrid causes error "qx undefined". (see att.)
Reinstalling of D4PHP doesn't fix the

More extensive capabilites in the IDE for component developers

Steve Cooney — Wed, 17 Oct 2007 23:08:43 GMT

QC#: 45199 Version: 1.0 Status: Open defect, requires resolution Description: There is a need to build in more extensive support for component developers. They need to see XML being processed, how form components are rendered, the intermediate files produ

Add the abiity to add the currently open file to the project

Brian Layman — Wed, 17 Oct 2007 23:07:28 GMT

QC#: 43841 Version: 1.0 Status: Open defect, requires resolution Description: This is really easy to do in Delphi for Object Pascal. It would be nice if you could do that for D4PHP as well.

Used Edit component as Browse button

A K — Wed, 17 Oct 2007 23:05:16 GMT

QC#: 50920 Version: 1.0 Status: Closed defect, no action required Description: The edit component has no type property that you can change. The only property is "text". Thus there is no way to implement a browse button in the fomr.

qx problem

guo danpi — Wed, 17 Oct 2007 23:03:39 GMT

QC#: 51801 Version: 1.0 Status: Open defect, requires resolution Description: when i set the default charset to gb2312 or utf-8 in tools->options->php,it will be a script error "qx not defined" if i generate a DBGrid page

libpq.dll Error on Startup

Opus International Consultants I T Consultant — Wed, 17 Oct 2007 23:00:16 GMT

QC#: 51261 Version: 1.0 Status: Closed defect, no action required Description: When starting Delphi 4 PHP I get an
"Error loading Dynamic Function PQescapeStrinConn from libpq.dll" error. Then freezes the IDE

Inheritance problem : events will not be called

Andreas Kardin — Wed, 17 Oct 2007 22:57:37 GMT

QC#: 51745 Version: 1.0 Status: Open defect, requires resolution Description: If you have the following inheritance hierarchy...
MasterPage1
^
MasterPage2
^
NormalPage
The event methods in MasterPage1 will not be called when displaying the NormalP

D4PHP displayed "?" on upper left of form with UTF-8 option.

Natane Nat — Wed, 17 Oct 2007 22:56:06 GMT

QC#: 51915 Version: 1.0 Status: Resolved defect, requires verification Resolution: Bug has been fixed Description: D4PHP displayed "?" on upper left of form with UTF-8 option.
It does happen on inheritance Form with UTF-8 option.

Can't connect to MySQL server on 'host'

Remco van Leeuwen — Wed, 17 Oct 2007 22:55:06 GMT

QC#: 52381 Version: 1.0 Status: Closed defect, no action required Description: When I try to run the eCommerce-example from the vcl library, I get the following error:
Can't connect to MySQL server on 'localhost' (10061) in C:\Program Files\....\vcl\adod